Automotive Brake Test Stands

TLZD-3 automotive brake test bench has a large drum diameter, high testing speed, high testing accuracy and reliable performance. It adopts a new type of high performance roller surface sticky sand material. It can test the maximum braking force, hysteresis force and process difference of the left and right wheels of a car, and is widely used in various types of car inspection lines (stations).

Implementation standards：
GB/T13564-2005 《Drum reaction type automobile brake table》
JJG906-2009 《Drum reaction type automobile brake table test bench inspection and certification procedures

1) Brake test stands Smooth running of the reducer and high testing accuracy.
2) European model, according to the latest national standard, drum diameter ø 245 mm.
3) Advanced sticky sand process, the adhesion coefficient is above 0.82 in both dry and wet state.
4) High quality and high precision sensor, ISO9002 quality system certificate.
5) Brake Test Stands High detection accuracy, good repeatability, braking force calibration error <1.5% (national standard ≤±5%).
6) The table body is made of 6mm thick WISCO steel plate, with high strength.

Projects	TLZD-3	TLZD-10	TLZD-13	TLZD-15
Max. permissible axle load mass(kg)	3000	10000	13000	15000
Braking force test range(KN)	2×(0~10)	2×(0~40)	2×(0~40)	2×(0~45)
Wheelbase (inside width/outside width)(mm)	700/2700	700/2900	700/2900	800/3000
Roller diameter x length(mm)	Ø245×850	Ø245×1100	Ø245×1100	Ø245×1100
Motor power(kw)2×2.2	2×2.2	2×11	2×11	2×11
Power supply(V)	AC380±10%	AC380±10%	AC380±10%	AC380±10%